Author: admin

Brake Replacement Master Cylinder Troubleshooting For Brakes!

admin  Automotive  ,

Do you feel confident that when your auto mechanic recommends a brake replacement, it is really true? How can he tell if the master cylinder on your brakes has failed? Or is he just trying to push an add-on to the other repairs on your car. How do you know if he is doing his job correctly and looking after your best interests and your safety, rather than taking you for a ride with a brake replacement?
Signs the Master Cylinder is failing:

* Soft, squishy feeling when you press down on the pedal – As constant pressure is maintained on the pedal (like at a stop light), it will begin to sink to the floor as the brake fluid leaks internally to the master cylinder. This is called “extended travel.” You may have to “pump” the pedal to regain normal pressure and keep the car from moving forward as the brakes slowly release. The red warning dash light should come on to indicate low fluid, or excessive movement “travel.” The fluid level alone isnt an indication of a good or bad master cylinder. Typically, the leak is internal, leaking past internal O-rings, so there is no obvious external sign that the master cylinder is “bad.”

* An external fluid leak could be possible, and would be visible to a mechanic during an under-hood inspection. The master cylinder usually has a plastic reservoir that holds the brake fluid, mounted with rubber grommets. The grommets allow for some movement caused by the pedal and fluid pressures. These grommets can leak brake fluid (a clear liquid) that can be seen with the naked eye.

* The metal brake lines attached to the master cylinder can leak fluid at the threaded connections, or from the internal O-rings. When this happens, the fluid will drip down the power brake booster (the booster is what the master cylinder is bolted to). Brake fluid will dissolve paint rather quickly, so this kind of leak usually leaves a tell-tale sign of blistering, bubbled paint.

If you experience any of the symptoms explained above, check the following:

* Check brake fluid level and add more as needed;
* Make sure the cap fits snuggly and is not leaking or shows obvious signs of past leakage
* Visually inspect for external fluid leaks;
* Wipe away accumulated dirt and debris for ease of future inspections;
* Have your brakes inspected if more than 1 or 2 ounces is needed to top off the reservoir;
* Dont put off any needed repairs or a brake replacement.

Are you looking for professional advice on your brakes, or need a quality brake replacement? We will be glad to help you. Contact our ASE-Certified Technicians today at Clausen Automotive by calling (608) 221-8321 or go on-line at http://clausenautomotive.com for more information. Since 1975, our family-owned auto shop has proudly served vehicle owners in Madison, WI, and surrounding communities.

day In-person seminar on Implementing Risk Management Principles and Activities within a Quality

admin  Management  , , ,

Overview:

Risk management integrated into the overall quality management is one of the main components for global medical device compliance. To meet the approval requirements for almost every regulated market a comprehensive implementation and documentation of a full risk management lifecycle has to be demonstrated. This course introduces the major components necessary to achieve global regulatory compliance and approvability. The main emphasis is on European and US regulation. A practical path to implanting a successful risk management system across different subsystems will be presented. The main issues covered are risk management, compliance with IEC60601-1, usability engineering and software risk management. The course is based on 20+ years of experience in the medical device industry and emphasizes practical implementation issues and not just theoretical background. If your company is developing devices for international markets this seminar will give you the information needed to design and document a globally acceptable design lifecycle.

Why you should attend:

Since risk management is a wide spanning activity involving management, engineering, QA/RA, clinical affairs and manufacturing / sustaining engineering, the seminar addresses a broad audience and generates a common understanding of risk management principles and methods. Some elements of the agenda a specific to design engineering but a shared knowledge of risk management principles is essential to successfully implement a working risk management system.

Course Outline: Day 1 – Agenda Lecture 1: Introduction into Risk Management and Quality System Integration Why risk management? Risk Management Lifecycle and stakeholders Risk Management Benefits How I to implement Risk Management into ISO13486 Q&A

Lecture 2: Risk Management to ISO 14971:2012 Risk Management Planning Risk Management Life Cycle Hazard Identification

Day 2 – Agenda Lecture 3: IEC 60601-1 3rd edition (incl. A1) References to Risk Management Section 4 Risk Related Issues Compliance for Non-Software Related Issues The IEC TRF (technical report form)

Lecture 4: Usability Risk Management (IEC62304:2006 / FDA usability Guidance) Use errors as hazard source User intervention as hazard mitigation Usability engineering lifecycle Application specification

Lecture 5: Software Risk Management (IEC62304 / FDA software reviewers’ guidance): Critical Software Issues Software Hazard Mitigation Strategies Software Item, Unit and System Definition Software Failures as Hazard Sources

Who Will Benefit: This 2-day course is particularly relevant to managers, supervisors, QA / RA and design/system engineers. Even experienced personnel will benefit from the across industry perspective and the illustration of standard practices that only a presenter with extensive experience in more than 100 projects can provide. Specific positions that would benefit are: Project managers Risk managers Engineering management Quality Assurance personnel Regulatory and Compliance professionals responsible for FDA / notified body interactions System and design Engineers Software Engineers Usability Engineers Verification / validation personnel Production Managers ABOUT SPEAKER – Markus Weber Principal Consultant, System Safety Inc.

Markus Weber, Principal Consultant with System Safety, Inc., specializes in safety engineering and risk management for critical medical devices. He graduated from Ruhr University in Bochum, Germany with a MS in Electrical Engineering. Before founding System Safety, Inc., he was a software safety engineer for the German approval agency, TUV. Since 1991, Mr. Weber has been a leading consultant to the medical device industry on safety and regulatory compliance issues, specifically for active and software-controlled devices. In conjunction with the FDA, he has published works on risk management issues and software-related risk mitigations. Mr. Weber has helped multiple companies, from startups to Fortune 500 firms.

Location: Singapore

27th & 28th February 2014

9:00AM-6:00PM Venue: Mandarin Orchard Singapore Address: 333 Orchard Road, Singapore 238867 Price: $1,595.00 Discount: Register now and save $200. (Early Bird) Until January 25, Early Bird Price: $1,595.00 from January 26 to February25, Regular Price: $1,795.00 Contact Information: Event Coordinator Call: +65-3158-3448 Fax: 302-288-6884 Email: Website: https://www.globalcompliancepanel.com LIVE CHAT SUPPORT – http://www.globalcompliancepanel.com/chat/client.php Event Link: http://bit.ly/1dcfswj NetZealous LLC, DBA GlobalCompliancePanel, 161 Mission Falls Lane, Suite 216, Fremont, CA 94539, USA Phone: 1800 447 9407

Junk Silver Coins A Good Investment

admin  Investment

When you’re thinking of building a perfect and profitable business then junk silver coins should be your number one choice. For beginners, the 2008 economic crisis had helped made the reputation of silver more reputable. Today we’re awaiting an elevation in people who are thinking on going to buy junk silver coins; thus being a seller in a buyer’s market can be a really good place for numerous investor.

In any manner, prior to joining the craze, remember that you are acquainted with all the pros and cons of this type of business.

1. Becoming a coin dealer tenders you a way to reap earnings on each investment needed each time you buy junk silver coins. The truth is, coin dealership is believed to be one of the most rewarding ways of doing business that is associated to silvers. You can try becoming a coin dealer, and I’m sure you’ll be blown away that after 1-2 hours, you were able to sell and buy junk silver coins. This kind of business doesn’t need too much of work because you can immediately generate an earnings from it.

2. The silver market similar to the stock market is also very volatile. Making a transaction all relies on the value of silver which differs from day to day. That is the reason why it is really crucial that you are persistently on the look out and concise before the price of silver declines your intended price. Especially for junk silver coins where the spot price is the only one that directs the buying and selling price for junk silver coins. Keep in mind to be on guard always that way when the price of silver escalates, you can invest on it rapidly.

3. Even if there are no vital differences basing at all kinds of junk silver coins, there are still some distinction that an investor must be wary of. Like for example, Franklin half dollars somewhat a bit more expensive than Kennedy half dollars. You should remember all these things each time you sell and buy junk silver coins so you can generate a lot of money.

A few people might presume that selling and buying silver junk coins is not the best investment, this still remains to be one of the most easy businesses in the market. You can try selling and buying smaller junk silver in smaller denomination if you are planning of investing in smaller portfolios. As your capital increases from the ensuing profits, you can invest it back into the business, enabling you later on to purchase bigger silver bags that can help you make increased profits per transaction. This means that you take control of all your investments which means you are also in control of all you assets and use them once the situation becomes in favor for you.

Wise investors give thought intensely on their investments like selling and buying junk silver coins. In spite of the financial problems, the price of silver still surged up to 150%. This investment venture is though of as a very nice investment since you, as an investor, have many choices to choose from each time you cash out. The next time you consider of investing your money, remember to think of this investment option of selling and buying junk silver coins since who knows this can assist you to earn many profits.

Having mobile app for business prominent benefits

admin  Business

Can you imagine your life without your mobile device, without all the opportunities it gives? The answer is most likely “no”. Our mobile phone has penetrated into different spheres of life, abounding with various useful things, and an essential aspect to speak about is the role of mobile applications in business. So the name of the game is the importance of mobile app for business.

Mobile application market is developing by leaps and bounds. No matter whether you sell hosiery or jewelry, offer spa or repair service, people would have a better way to reach you via mobile app. Business mobile app serves as an intermediary between you and your customers.
Does your business need an app?
In fact, every business should aim at development and growth, and for every company, its necessary to be up-to-date with ways which can bring value to it. Therefore, business mobile app remains a crucial part of different industries as its an excellent solution for business marketing.

In fact, mobile application development benefits are remarkable. First of all, a mobile app, being a unique little world for your business, is also a tool for promotion. If you have ever wondered why your business needs an app, here you can find the answers, several sound arguments for you to think over. Perhaps, you are thinking to get an app for your business right now, so these tips are here to convince you! 5 Benefits of having mobile applications for business: 1. Effective interaction.
A mobile app will be available for your clients when they are on the go, when they simply want to find, buy or book something, right here and right now. Thus, answering the question “why your business needs an app”, one of the most important reasons to mention is its convenience for target users that entails your profit, which presupposes more constant contact. The availability of mobile app provides an opportunity for connection. Thus, some people prefer this kind of communication rather than calling, let alone going to a certain place to consult. There is more to it than that, within a mobile app, you can minimize the use of email, having reminders and notifications included. On top of that, mobile applications simplify the way of purchasing or paying for a certain service. As a result, you save customers time and get money in a quick and handy way.

2. Brand awareness/recognition.
Mobile apps in business help to be more recognized, to create uniqueness and give zest to its brand. What is more, perhaps, the pleasant impression can further make your customers return to your service/product again and again. Branded business apps provide identification and special style. By the way, the mobile application plays an important role in customers impression about the product. Having it for your business enhances a chance of your customers sympathy.Therefore, arming yourself with creativity and fantastic ideas will increase your chances of success.

3. Being among the forwards.
Having a mobile app for medium business has become popular while it is less common in small business. However, if it exists, it will tell volumes.It can make your business strategy more efficient, letting you stay competitive. If you are contemplating about the development of an app for your business you are on the way to make a sound decision. While your business rivals are hesitating, being afraid of devoting money to it or having some other reasons, you have a good motive by way of your business prosperity. Use all possibilities, think long-term and be ahead of others.

4. Financial advantage.
One more significant benefit. Mobile apps can increase corporate income. For example, by means of paid download, paid ads, ad placement and these are not the only variations that can be beneficial having such a functional tool as a mobile app. We can also speak about loyalty programs here. If your business is directly connected with the selling of certain product, loyalty programs are good market-speaks.This is a profit making decision for keeping the customer. Loyalty program can not only push up sales but find the clientele, who will be satisfied with your product/service as well as with your loyalty points. As a result, you have good sales. Moreover, stability it gives is also a big plus!

5. Marketing tool.
The mobile app is a sort of marketing channel for business. It entails customer engagement and loyalty, attracts attention. If we fit all the benefits together, we can get an important marketing strategy, deserving attention, even more so in the time of rapid increase in mobile apps in the market. And its not for nothing. User-friendly interface, interesting content and beautiful design of your app can fall under notice of your customers.

In a nutshell.
Nowadays, in the onrush of technology and the tendency to come up with innovations, the mobile app provides very useful and advantageous function spectrum, which can satisfy your customers and make a profit for you. Business owners, who have it are currently state-of-the-art, staying competitive and promoting their biz via the mobile app.The facilities of mobile apps are practically endless, but users delete many of them after several days, if not less. Thats why its development should be taken seriously, as the future source of your success.

Play safe with the help of Renewable Energy

admin  Energy  ,

If we individually see this word ENERGY then we can say that “Energy is defined as the ability or the capacity to do work”. And we use energy to do work and make all movements. When we eat, our bodies transform the food into energy to do work. When we run or walk or do some work, we burn energy in our bodies. Cars, planes, trolleys, boats, and machinery also transform energy into work. Work means moving or lifting something, warming or lighting something. There are many sources of energy that help to run the various machines invented by man.”Man has discover fire by burning wood for cooking and heating which we can say one type of energy and the use of energy.

For thousands of years we only used sun, water and wind power but in todays world we are mainly depend on fossil power. As early as 4000-3500 BC, ships were running by wind energy. With the use of hydropower through water mills or irrigation systems, things began to move faster. In rural India still people are using fuel wood and dung cakes as major source of energy. Solar energy is used for drying and heating.

As industry grows, the use of energy in the form of fossil fuels began. It started with exploitation of coal to exploitation of oil. In early stage, we used coal, after that oil, and natural gas were in use as the main source of energy. Before half of century nuclear power began being used as an energy source. But as the usage increased it starts affecting environment.

Oil prices are increasing day by day because production is decreasing. And at the same time demand of the energy is also increasing and the price of natural gas, too, has risen. Therefore, Renewable Energy has grasp public, media, and political attention as a potential key to the critical concern of environment change.

There are many product projects which are commenced for constructing Renewable Energy Systems. Many companies which are in Energy business are inventing new ways to dig out Renewable Energy from renewable sources. In couple of next few years cost of oil will boost up. Oil supply may soon peak as utilization continues to grow, known supplies run out and new reserves turn out to be difficult to discover.

Prices of oil and natural gas have risen at the same time electricity is no longer chipper. If we compare Renewable Energy from wind and solar powered alternatives with available energy of oil and natural gas then no longer look so costly. Global warming, a long-range phenomenon, may not be uppermost in peoples minds during an economic downturn. Alternate energy may be costly now but will reduced to zero prices for the manufactures, so the costumer will get benefit from that also.

The most effective solution is to diversify our energy supplies at home. That means, to opening up areas to safe and environmentally responsible development and built more Renewable Energy Systems to support safe environment. Instead of paying for high prices of gas and oil imports we should use our own, clean domestic resources to fuel our own economy here like using solar and wind technologies.

Main weakness of Renewable Energy Systems is high initial cost of set up. Problem with Renewable Energy Systems is substantial investment for infrastructure to generate it. Current market of renewable energy is not as broad as gas and primary energy source has. High initial cost and scarcity of market are making Renewable Energy very costly for consumer.

A Few Ideas For Making Custom Motorcycle Helmets

admin  Automotive

Have you ever though about making your own custom motorcycle helmets? You may have thought about it, but then realized that you’re not sure which type of customization you want to make. You may think of customizing your helmet to be completely different than what someone else thinks. They may be considering a custom paint job, and you may be thinking about a helmet mohawk.

You have to be able to know what it means to customize a helmet in order to know what actually qualifies a helmet as being customized. Basically when you customize something you are changing it’s original form to something different without changing the overall purpose of the object.

When you understand what it means to customize a helmet, or any other object for that matter, then you can identify different ways that your helmet can be customized. You’ll be amazed at how many different ways you can create custom motorcycle helmets. We’ll only focus on a few.

For starters, if you don’t want to permanently alter your helmet, meaning you don’t want to change the structure of it, then you can consider options for adding to it such as stickers, paint, or mohawks. These items can be used to add a new look to your helmet, but will not directly alter the helmet structure itself.

You can use other things to create custom motorcycle helmets, but the downside to these items is that you have to alter the structure of the helmet in one way or another. This means you either have to remove some of the existing parts, or you may have to drill into the helmet. The latter of the two is the case with helmet spikes, which stick out the top of the helmet. In order to fasten them you have to drill a whole through the helmet so that they can be attached with a bolt.

Drilling through your helmet can be tricky, and can decrease the effectiveness of the outer shell, but if you’re alright with this, then you can go ahead and do it. The method you choose does not really matter because in the end you will have custom motorcycle helmets that look great.

Energy Psychology The Way to Overcome Irrational Fear, Anger, & Anxiety is in Your Hands

admin  Energy  

You feel nervous about a talk you have to give this evening. But, you try a new technique you have heard about. Your fear dissolves in ten minutes and you deliver a great talk.

What caused this change? How did you overcome your irrational fear?

Every time your husband’s ex-wife appears at your home to pick up her daughter you are filled with jealousy. It makes no sense to your rational mind. This time, however, after using this new technique, you greet her with a genuine smile. You show her a new appreciation for each of your roles in your stepdaughter’s life.

What caused these changes?

You have been using Energy Psychology.

“Energy Psychology” Is One of the Most Exciting Innovations to Come From Psychotherapy in Decades!

People from many walks of life now claim that they are eliminating debilitating fears, prolonged grief, irrational jealousies, and pesky anxieties using simple Energy Psychology techniques.

Even veterans dealing with the intrusion of haunting memories, insomnia, and phobias are now getting help with Post Traumatic Stress Disorder that had in many instances resisted years of psychotherapy.International treatment teams are also finding that Energy Psychology is the best approach available to them for applying psychological first-aid in the field after a disaster strikes.

While these claims are extraordinary enough, what’s most surprising about Energy Psychology is how easy it is to learn and apply.

How Energy Psychology Can Help You Overcome Irrational Fear, Anxiety, Anger, and Jealousy!

Energy Psychology provides you with freedom from the grip of irrational fears and anxieties, self-defeating patterns of behavior, and kneejerk reactions to challenging situations. Energy Psychology accomplishes quickly what even the best talk therapies accomplish only slowly.

Energy Psychology draws from the principles of acupuncture, but without the use of needles. It has also been called “acupuncture for the emotions” and “acupuncture without needles.” When you use the techniques of Energy Psychology, you tap acupuncture points on your body with your fingers.

This is combined with a variety of thoughts, statements, affirmations, and various physical tasks such as humming and counting. The method ultimately sends signals to the brain that rapidly reprogram your emotional responses.

Sound strange?

Maybe, but it works. In fact, hundreds of thousands of people are reporting that it works! The tapping is believed to send signals to the brain that change your brain’s response to the situation you are visualizing. Neurological patterns that interfere with your success, happiness, and wellbeing can all be targeted.

Energy Psychology in the Clinic and in the Home

Some people learn Energy Psychology from a book. Others learn it from a class or from a therapist or other practitioner. While the tapping itself is easy to learn and can be done on your own, sound judgment in knowing where to focus your attention is critical. If you decide to learn it from a therapist or a class, then as with any health care treatment, be sure you do some investigation and find a practitioner you can trust.

Convenient Power Window Operation With Tough Grade Pontiac Window Motor

admin  Automotive

Automotive technology has increasingly improved these days. With these enhancements, vehicle operations can now be controlled with a simple push of a button. Passenger and driver convenience is achieved with the added performance and appearance of these innovative functions. One great example of these innovations is the power window. Power windows basically move your car window up and down with a simple push. It starts will the vehicle battery that sends the power to the distribution box. The power is then directed to the ignition so the windows will be in operation when you turn on your car. A wire runs to the fuse box and to the window switch. This allows the power to move up to the window; thus allowing it to move up and down. All components that make up the power window works hand in hand in giving you smooth access of your car window. Among the essential components of your Pontiac power window is the window motor. It is crafted to facilitate current efficiency for faster and seamless relay of mechanisms. It works in precision with the other parts to ensure smooth and uninterrupted power supply.

Pontiac window motor is designed from high quality and dependable construction that offer product longevity and reliability that yields years of service without fail. As you drive through harsh weather conditions, your window motors enable you to make necessary adjustment to secure your car and protect it against rainfall. As your car window goes up and down, the motor needs continuous supply of accurate amount of electricity. Precision engineering and technology has been incorporated in the product design to enable it to offer long service life. The tough and dependable construction of the part guarantees reliability and longevity that offers years of service. Cold weather, contaminants and other elements could, however, affect its performance. Moisture, debris and low temperature could affect the condition of your Pontiac window motor. Corrosion and other damages may be induced resulting to fail movement of your car windows. Once you notice that your window motor has failed, you need to immediate inspect the part. Check for fuses and wirings that have failed. Making sure that the wirings are set for seamless mechanism eliminates your chance of having short circuit or burnt and worn parts.

Pontiac window motors are now conveniently available for specific vehicle applications. They are designed as s much better and more practical solution to power window maintenance. Immediately securing Pontiac window motor replacement is essential to ensure of reliable window performance. Delaying replacement only increases window operation accidents that could have been avoided if the defective window motor is replaced right away. Installation of the part is simple and easy with no fancy tools and modifications needed. Make sure that you secure the right fitting window motor for your Pontiac ride to ensure proper fitment. With a good set of window motor in your vehicle, you get to have your full attention on the road that significantly lessens the chances of getting into accidents and stresses of daily driving. Overall, dependable Pontiac window motors makes a welcoming addition to upgrading the interior cabin designs of your vehicle.

Tips To Start An Online Business

admin  Business  ,

Start your online business now. If you just thinking of doing it, take action and jump into it. You may hear a lot of opposite opinions but you better listen to yourself. Internet is a fast growing industry that has so much to offer and is still at its birth. It counts only 15 years and there is still a piece of the pie for everyone. Here are 8 tips that will help you through out your processes.

Fall In Love With Your Product
You don’t like the product you are promoting?You are not so sure that it is good or you are just not into it?Then it will not sell. You have to love it, you have to believe in it and you have to try it by yourself. This attitude will give you double excitement in promoting your product. I am not joking on this.

Accept The Failure
When you start an online business maybe you will have to deal with some failures. You have tried hard but it didn’t work. It didn’t give you the numbers you wanted and you disappointed yourself. Accept the failure, cut the losses and move on. There are many reasons that this can happen. Do not be concerned and start creating a new project.

You Do Not Know Everything
As the title says don’t assume that you know everything. Nobody does. Be curious and searching for new products, projects or ideas should become your everyday task. Creating something valuable could be the result of that. Don’t forget that searching for new things is a learn able skill.

Make Your Plan
Make your plan with the old fashion way. Take pen and paper and write everything down before you start an online business. Predict if there is some danger in your project and consider about it. Sometimes you will find out that it is not worth doing it or the exact opposite

Blog It!
Everything in the net is moving fast. You have to adopt the new ways. A blog is like an Id, it is like having a domain name. Blogging is the most essential thing you have to do. It is your mark to the online world. You don’t blog, you don’t exist.

Listen To You
Do not listen to them. Quitting your daily job and going online could be risky at some point but in a few years from now looking back you will realize that this was the best decision you ever made

Ask The Gurus
They’ve been there, they’ve done that. It’s not a shame to ask and there aren’t any silly questions. If they are making millions they will know for sure better than you but don’t forget that once they were like you.

Trust Yourself
Intuition is not a skill, it is something you’ve got and you have to listen to it. If something inside you tells you follow this link or do it, then trust it and do not hesitate. This is the thin line between you and the crowd that will make you distinguish.

Fuso Canter Eco Hybrid Still On Top Of The Commercial Grade Vehicles

admin  Automotive  , , ,

When it comes to being number one, the Fuso Canter Eco Hybrid has clinched that spot for the second consecutive year. Offering their customers the best in design, comfort, and function, this hybrid is well deserved of this prestigious award.

Earning the “Irish Green Commercial of the Year” recognition from a judging panel of over 700 industry experts is no small deal. However, the Fuso Canter made it look like child’s play with the votes of all of the judges across the board. These judges consisted of professionals in the automotive industry such as engineers, driving instructors, and automotive journalists. The judging for this award comprised of categories similar to the award for “International Truck of the Year.” These environmentally friendly trucks are judged on 12 different sets of criteria with seven points maximum to be awarded in each category. The areas that were focused on for this outstanding achievement are power/weight ratio, fuel efficiency, handling, cab equipment, driving and ride comfort, and appointments.

This powerful, yet efficient fleet of vehicles is the leaders in their field of light-weight trucks when it comes to hybrid technology. Erik Rnnefarth, Manager Marketing and Product Fuso Europe, at the “Fleet Transport Energy Futures Forum 2014”, commented, “Fuso, one of the largest manufacturers of commercial vehicles in Asia, is the global leader in hybrid technology for the truck segment and has more than 20 years of experience in this field. He also pointed out that the Fuso Canter Eco Hybrids are currently in service with various trucking and transport companies all over the world. There are over 2000 of these vehicles being used by companies to cut down on fuel costs and helping to preserve the environment at the same time. With this many award winning eco-friendly vehicles on the road, the benefits are universal. As a matter of fact, these engineering wonders have already earned many awards in Europe and Japan for their performance.

With up to 23% less fuel usage than compared diesel truck models, these vehicles are able to pay for themselves within three to four years in fuel economy alone. Housing a four-cylinder turbo diesel engine, this vehicle is no slouch. It has the capability of transporting the same heavy loads that the diesel guzzling counterparts deliver. This light-weight truck has an output of 150 horsepower combined with a 40 KW electric motor. More than enough to power these vehicles while maintaining a load capacity of 4.8 ton. With all of this tonnage availability, the Canter is on top of the list even when compared with 7.5 ton trucks.

Although these trucks are deemed the cream of the crop in eco-friendly and efficient commercial vehicles, that has not stopped the Fuso from continually developing new and better technology. They have improved on the E-Cell with a new emission-free and battery-powered Canter. This example of the first small production of these all-electric commercial trucks was unveiled by Fuso at the IAA Commercial Vehicles show. These completely electric light-weight trucks are silent and emission-free.

The Fuso did not stop at the engineering and power aspects of improving their Canter models. Further enhancements have been done on specific safety features and they have expanded their line of models to include different models. These additions add to the value of the overall appeal of these highly sought after eco-friendly transport vehicles. With the addition of extra comfort and functionality of the driving aspects of these trucks, the Canter is quickly becoming the sought after light-trucks for manufacturers and businesses all over the world.

When it comes to everything that an eco-friendly light transport vehicle has to offer owners, the Fuso Canter Eco Hybrid is covering all of the criteria. Winning the “Irish Green Commercial of the Year” award for the second year in a row is proof that this fleet of light-duty commercial trucks is the future of the light transportation industry.